What are the main reasons for hydraulic fast connector leakage?

Many industries now use fast connectors. Many customers reflect the problems of hydraulic fast connectors. The following editors sort out the reasons why the fast connector leaks. Come and check what is the reason for your fast connector leak?

Reason 1: Design and manufacturing defects

In pipeline design, more steering angles are rarely set, otherwise it is easy to bear the huge impact of the parts of the steering angle, resulting in leakage. In actual operation, staff will conduct on -site investigations to avoid design and manufacturer's defects.

Reason 2: Intellectual and vibration causes the oil pipe joint to loosen

In addition to the hose, there is a large amount of hydraulic hose joints in the hydraulic system. These accessories need to be affected by hydraulic pressure. If you cannot withstand the impact, it is easy to loosen. It will cause problems in the pipeline connection for a long time, causing the rapid leakage of the hydraulic connector.

Reason 3: The wear of fast connector seals and accessories

In the hydraulic system, many fast connector seals are used. However, with the passage of time, friction will occur between the sealing parts, which slowly weaken the sealing performance and eventually causes the hydraulic fast connector to leak. In fact, friction is inevitable in the entire hydraulic system and can only be reduced as much as possible.

Reason 4: Oil temperature is too high, fast connection sealing parts are not compatible with hydraulic oil, and are deteriorated.

If the hydraulic temperature is too high, it will affect the fast -connected sealing parts and hydraulic hose joints, especially the loose rubber products in the fast connector sealing parts. Once loosened, it is easy to leak.