How to weld it quickly

There is a product in the connector that is better, that is, fast connector. The horizontal contraction of the fast connector is related to the welded metal weight of the welded seam of the unit. Due to the increase in the resistance during the horizontal contraction of the welding seams, it increases with the amount of weld metal, and the contraction produced during the welding process is large, and the shrinkage produced during the welding process gradually decreases. I believe everyone is more interested in how to weld the fast connector. Let's take a look.

1. The gap between the root of the roots increases with the gap between the roots and the amount of horizontal contraction increases significantly, because when the gap between the roots increases, the total number of welds also increases.

2. Diameter of the box. With the increase of the diameter of the electrode, the amount of horizontal contraction decreases. However, unless a large diameter can be used in a welding channel, the method of increasing the diameter of the bench will not reduce the horizontal contraction.

3. The form of the slopes. Experiments have shown that compared with the double -sided V -shaped slopes, the docking connector of the single -sided V -shaped slopes will produce a larger horizontal contraction. The part is due to the larger cause of the welded area of the V -shaped slope mouth.

There are many places to pay attention when welding such products like fast joints, because if the operation is improper, it is easy to have problems. If you understand the relevant operation methods before the operation It can show good results when I hope that the content we introduce will be helpful to everyone.